| Type: | Stainless Steel Sheets |
|---|---|
| Standard: | ASTM |
| Grade: | 300 Series |
|
Still deciding? Get samples of US$ 40/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Products | XM-21 Stainless Steel Sheet |
| Thickness | cold rolled 0.3 - 3.0mm hot rolled 4.0 - 10.0mm |
| Standard Size | cold rolled 1000*2000mm 1219*2438mm hot rolled 1500*6000mm |
| Surface | 2B BA NO.4 Hailrline Mirror 8K .etc |
| Brand | TISCO JISCO POSCO BAOSTEEL |
| Standard | ASTM A240 / JIS G4305 / EN 10088-2 |
| Other Grade | 201 202 301 304 304L 309S 310S 316L 316Ti 317L 321 347 405 410 420 430 440 441 443 444 2205 2507.etc |
| Our Service | Slit Cutting, Surface process, |
S30452 stainless steel is an austenitic stainless steel formulated for primary forming into wrought products. Cited properties are appropriate for the annealed condition. XM-21 is the ASTM designation for this material. S30452 is the UNS number.
It has a moderately low ductility among the wrought austenitic stainless steels in the database.
The graph bars on the material properties cards below compare S30452 stainless steel to: wrought austenitic stainless steels (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
| Grade | C | Mn | P | S | Si | Cr | Ni | Mo | N | Cu | Other Elements |
| XM-21(S30452) | 0.08 | 2.00 | 0.045 | 0.030 | 0.75 | 18.0 - 20.0 | 8.0 - 10.5 | --- | 0.16 - 0.30 | --- | --- |
| Grade | Tensile Strength, min | Yield Strength, min | Elongation in 2 in. or 50 mm, min, % | Hardness, maxC | Cold Bend°D | |||
| ksi | MPa | ksi | MPa | Brinell | Rockwell B | |||
| XM-21(S30452)stainless steel coil | 90 | 620 | 50 | 345 | 30 | 241 | 100 | not required |
| XM-21(S30452)stainless steel plate | 85 | 585 | 40 | 275 | 30 | 241 | 100 | not required |
){kind=link}