| Type: | Alloy Steel Bar |
|---|---|
| Standard: | ASTM |
| Technique: | Hot Rolled |
|
Still deciding? Get samples of US$ 10/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
17CrNiMo6 Alloy Steel Round Bar Hot Rolled / Forged Steel Rod Supplier
| Products | Alloy Steel Round Bar |
| Diameter | 13 - 300mm |
| Length | 6m or custom cutting as request |
| Grade | Alloy Steel |
| Our Service | Cutting , polishing, packing, heat treatment |
| Brand | BAOSTEEL , XINGCHENG, DSS,CHONGQING, XNSS,HLXT.etc |
| Standard | GB , ASTM , JIS , EN , DIN |
| Company Type | storgae company and process service |
| GRADE | NUMBER | C | Si | Mn | P | S | Cr | Mo | Ni |
| 17CrNiMo6 | 1.6587 | 0.15-0.20 | ≤ 0.40 | 0.40-0.60 | ≤ 0.035 | ≤ 0.035 | 1.50-1.80 | 0.25-0.35 | 1.40-1.70 |
17CRNIMO6/1.65827 STEEL SIZE&TOLERANCE&PROCESS |
||||
| Shape | Size(mm) | Process | Tolerance | Length(mm) |
| Round | Φ6-Φ50 | Cold Drawn | H11 | 3000-5800 |
| Round | Φ40-Φ300 | Hot Rolled | -0/+3mm | 3000-10000 |
| Round | Φ120-Φ1000 | Hot Forged | -0/+3mm | 3000-10000 |
| Flat/Square/Block | Thickness:120-800 Width:120-1500 |
Hot Forged | -0/+3mm | 500-6000 |
Normalizing For 17CrNiMo6/1.6587
1.Nominal normalizing temperature:840-890°C
2.Hold the temperature for several hours
3.Cooling in the air
Annealing For 17CrNiMo6/1.6587
1.Nominal Annealing temperature:630-650°C
2.Cool slowly in the furance
3.Maximum Brinell hardness of 229
Hardening and Tempering(QT) For 17CrNiMo6/1.6587
1.Nominal Hardening temperature:830-865°C
2.Hold at this temperature then quench in oil
3.Tempering as soon as possible when the temperature low to ambient temperature
4.Heat the steel carefully to a suitable temperature selected by reference to a tempering chart or table
5.The usual tempering temperature is 600°C which depending on the actual requirements
6..keep the material out of the furnace ,then cool in the air
1.Tensile strength: 980-1270MPa
2.Yield point: 780MPa
3.Percentage reduction of area after fracture: 40%
4.Elongation after fracture: 11%
5.Impact test (+20°C): Longitud - 45~50J
1.Shape:Round/Square / Flat/Shafts/Rollers/Blocks
2.Surface condition:Black surface/Bright surface
3.Heat Treatment:Normalized/Annealed/QT
4.Straightness:Max 3mm/m(Enhanced straightness may be available on request)
5.Length:3000-5800mm suitable for 20″container. above 6000mm,suitable for 40″ container
6.Grain Size: 5-8 acc to ASTM E112-96
7.Typcial Hardness:HRC28-32
8.Ultrasonic Standard: Sep1921/ASTM A388/EN 10228-3
9.Non Metallic Inclusion: 2 max acc to ASTM E45 /K4≤20 acc to DIN 50602
10.Forging Ratio: minimum 4 : 1
11.Marking: Grade/Weight/Length/Size/Heat Number
A material test report(Inspection Certificate EN 10204 3.1) will be provided, documenting the following:
1.Chemical analysis
2.Mechanical properties
3.Surface hardness
4.Non Metallic Inclusion
5.Heat Treatment Process
6.Grain size
7.Forging ratio
8.NDE test method/criteria
Company Informations
Our company's main material of all kinds of round steel, ling Steel, Xuan Steel, Benshan Steel, Tiangang, Shandong Luli steel, rongcheng steel, Professional, Handan, Laigang, Jiyuan steel and other major steel mills all kinds of excellent special steel designated agents in Tianjin, monthly sales of all kinds of steel 40,000-60000 tons.
We have more than 4 warehouse for stock our bars. About 30 grade of products keep in stock long time, more than 800 size ensure the short deliver time for clients.
We have a warehouse specially for steel round bar processing, include cutting, polishing, heat treatment.etc
The company's sales network throughout the world, products are widely used in a variety of machinery, standard parts, automobiles, gears, forging, hardware tools and other industries.
We manufacture the following popularly used grades:
| EN19, EN24, EN25, EN26, EN30, EN31, EN36C, EN39, EN 40, EN41B, EN42, EN9, EN14A, EN15, EN16, EN18, EN47, EN100, EN351, EN353, EN354, EN355, C22E, C25E, C30, C35E, C45, CK45, C50, C55, C60, S45C, S235J2, S275J2, S355J2, ST52.3, C35E, C45R, 35B2, 28Mn6, 46Cr2, 34Cr4, 41Cr4, 20Mn5, 42CrMo4, 50CrMo4, 30CrNiMo8, 34CrNiMo6, 36CrNiMo4, 36NiCrMo16, 51CrV4 27MnCrB5, 32CrB4, 25CrMo4, 20MnCr5, 16MnCr5, 16MnCrS5,17CrNiMO6, 18CrNiMo7, 20MnB4, 23MnB4, 23MnB3, 34CrMo4V, SS410, SS416, SS420, SS431, SCM420, SCM440, 13Ni13Cr3, 15Ni16Cr5, 36Si7, 40Cr4, 15Ni5Cr4Mo1, 15Ni7Cr4Mo2, 16Ni8Cr6Mo2, 36Si7, 37C15, 35Mn6Mo3, 40Ni6Cr4Mo3, 40Ni10Cr3Mo6, 55Si7, 50Cr4V2, 25Cr13Mo6, 10C8S10, 14Cr14S14, 25C12S14, 40C10S18, 11C10S25, 40C15C12, |
| SAE 1010, SAE1025, SAE1030, SAE 1035, SAE 1040, SAE 1117, SAE1541H, SAE4130, SAE4135, SAE4140, SAE4145, SAE4145H, SAE 4330, SAE 4340, SAE 4820, SAE5160, SAE8620, SAE 8630, SAE8640, SAE52100, SAE9310, AISI1010, AISI1025, AISI1030, AISI 1035, AISI 1040, AISI 1117, AISI1541H, AISI 4130, AISI4135, AISI4140, AISI4145, AISI4145H, AISI 4330, AISI 4340, AISI4820, AISI 5160, AISI 8620, AISI 8630, AISI 8640, AISI 9310 |
| BS970 080A15, 080M15, 070M20, 080A30, 080M30, 080M40, 080A42, 080A47, 080M50, 070M55, 150M19, 150M36, 045A10, 045M10, 080M15, 210M15, 635M15, 637M17, 655M13, 665M17, 805M17, 805M20, 815M17, 820M17, 822M17, 835M15, 530M40, 605M36, 606M36, 708M40, 709M40, 722M24, 817M40, 826M31, 826M40, 945M38, 410S21, 416S21, 416S29, 420S29, 420S37, 431S29 |
| EN 10088-3 X12Cr13, X20Cr13, X30Cr13, X17CrNi16-2 |
| ASTM A105, ASTM A182 F5, ASTM A182 F9, ASTM A182 F11, ASTM A182 F12, ASTM A182 F22, ASTM A182 F91, ASTM A182 F92, ASTM A350 LF2, ASTM B16, ASTM A193 B7, ASTM A193 B16, ASTM A266 Grade 1-2-3 and 4, ASTM A29 all grades, ASTM A540 B21, ASTM A540 B22, ASTM A540 B23, ASTM A540 B24, ASTM A540 B24V |
| X22CrMoV121, 21CrMov57, 40CrMoV4-6, 27NiCrMoV15-6, 26 NiCrMo 14-6, 20CrMoVTiB4-10, X19CrMoNbVN11-1, X10CrMoVNb9-1 |
| DIN 1.2714/DB6, DIN1.2343/AISI H11, Din 1.2344/AISI H13 |
| GOST 4543-71 33XC, 38XC, 40XC, 45XH, 30XH3A, 12X2H4A, 20X2H4A, 20X2H4MA, 18X2H4MA, 30XGCA, 40ХН2МА, 40Х2Н2MA, 30ХН2МА |
Products Show
){kind=link}